A500.2

POWER AMPLIFIER (450wX2/4Ω)

SKU: 3cd00d2cedce Category:

Description

MODEL A150.2 A300.2 A500.2
Power (Both channels driven)  (EIAJ) 400W x 2 600W x 2 1200W x 2
 (RMS) 180W x 2 270W x 2 450W x 2
 (RMS) 100W x 2 180W x 2 250W x 2
Bridge Mono Mode  (RMS) 800W 1200W 2400W
 (EIAJ) 360W 600W 900W
Input Sensitivity (Limiter Off) 0.9 – 1.1V (+0/-1dBv)
Input Impedance 20kΩ balanced or 10kΩ unbalanced
Frequency Response (At 10dB below Rated Output Power) 20Hz~20kHz (+0/-1dB)
Voltage Gain 28 (+/-0.5dB) 30 (+/-0.5dB) 30 (+/-0.5dB)
THD + N (1kHz 1/8 Rated Power, A-Weighted) <0.1% <0.1% <0.1%
S/N Ratio (Ref. 1kHz, A-Weighted) > 96dB > 98dB > 95dB
Crosstalk (Below Rated Power) > 70dB > 70dB > 70dB
Damping Factor (1kHz, 8W) > 180 > 180 > 200
Power/Output Circuity Switching Power Class-D
Protections Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar
Controls Front: On/Off Power Switch, Volume Channel A, B – Rear : 4-preset modes
Indicators POWER: 1 green LED – PROTECTION: 2 red LED – SIGNAL: 2 green LED – CLIP 2 red LED
Connectors Inputs: Balanced XLR / ¼‘‘ TRS Outputs: ¼‘‘  TRS /Speakon Inputs: Balanced XLR /¼‘‘ TRS Outputs: ¼‘‘ (6.3mm) TRS /Speakon       Inputs: Euro block, Outputs: Euro block
Power Supply AC: 110-120V or 220~240V 50/60Hz
Dimension (W x D x H) 483 x 360 x 44 mm 483 x 360 x 44 mm 483 x 360 x 44 mm
Weight 3.7 kg 4.7 kg 5.1 kg

Additional information

brands

Show